Electric Motor, Power Tool, & Related Repairers
Repair, maintain, or install electric motors, wiring, or switches.
Technology Tools
Key Tasks
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Record repairs required, parts used, and labor time.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Lubricate moving parts.
- Set machinery for proper performance, using computers.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Rewire electrical systems, and repair or replace electrical accessories.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Weld, braze, or solder electrical connections.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Repair and operate battery-charging equipment.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Test battery charges, and replace or recharge batteries as necessary.
Skills
Knowledge
Build a Resume for Electric Motor, Power Tool, & Related Repairers
Create a professional, ATS-optimized resume tailored to this career path.
Abilities
Work Activities
Work Context
Face-to-Face Discussions with Individuals and Within Teams
How frequently does your job require face-to-face discussions with individuals and within teams?
92%
Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets
How often does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats or life-jackets?
92%
Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls
How much does this job require using your hands to handle, control, or feel objects, tools or controls?
91%
Exposed to Contaminants
How often does this job require working exposed to contaminants (such as pollutants, gases, dust or odors)?
90%
Importance of Being Exact or Accurate
How important is being very exact or highly accurate in performing this job?
88%
Spend Time Standing
How much does this job require standing?
85%
Frequency of Decision Making
How often is the worker required to make decisions that affect other people, the financial resources, and/or the image and reputation of the organization?
83%
Indoors, Not Environmentally Controlled
How often does this job require working in an environment that is not environmentally controlled (like a warehouse without air conditioning)?
81%
Freedom to Make Decisions
How much decision making freedom, without supervision, does the job offer?
78%
Time Pressure
How often does this job require the worker to meet strict deadlines?
76%
Work With or Contribute to a Work Group or Team
How important is it to work with or contribute to a work group or team in this job?
76%
Exposed to Sounds, Noise Levels that are Distracting or Uncomfortable
How often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable?
75%
Exposed to Hazardous Equipment
How often does this job require exposure to hazardous equipment?
74%
Impact of Decisions on Co-workers or Company Results
What results do your decisions usually have on other people or the image or reputation or financial resources of your employer?
74%
Contact With Others
How much does this job require the worker to be in contact with others (face-to-face, by telephone, or otherwise) in order to perform it?
73%
Coordinate or Lead Others in Accomplishing Work Activities
How important is it to coordinate or lead others (not as a supervisor or team leader) in accomplishing work activities in this job?
73%
Determine Tasks, Priorities and Goals
How much freedom does the worker have in determining the tasks, priorities, or goals of the job?
73%
Exposed to Hazardous Conditions
How often does this job require exposure to hazardous conditions?
72%
Exposed to Minor Burns, Cuts, Bites, or Stings
How often does this job require exposure to minor burns, cuts, bites, or stings?
70%
Telephone Conversations
How often do you have telephone conversations in this job?
70%
Spend Time Making Repetitive Motions
How much does this job require making repetitive motions?
67%
Duration of Typical Work Week
Number of hours typically worked in one week.
65%
Consequence of Error
How serious would the result usually be if the worker made a mistake that was not easily correctable?
64%
Exposed to Very Hot or Cold Temperatures
How often does this job require working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures?
61%
Health and Safety of Other Workers
How much responsibility is there for the health and safety of others in this job?
60%
Physical Proximity
To what extent does this job require the worker to perform job tasks physically close to other people?
60%
Work Outcomes and Results of Other Workers
How responsible is the worker for work outcomes and results of other workers?
59%
Level of Competition
To what extent does this job require the worker to compete or to be aware of competitive pressures?
57%
Importance of Repeating Same Tasks
How important are continuous, repetitive, physical activities (like key entry) or mental activities (like checking entries in a ledger) to performing this job?
56%
Deal With External Customers or the Public in General
How important is it to deal with external customers (as in retail sales) or the public in general (as in police work) in this job?
54%
Indoors, Environmentally Controlled
How often does this job require working indoors in an environmentally controlled environment (like a warehouse with air conditioning)?
54%
Spend Time Bending or Twisting Your Body
How much does this job require bending or twisting your body?
52%
Spend Time Kneeling, Crouching, Stooping, or Crawling
How much does this job require kneeling, crouching, stooping or crawling?
51%
Exposed to Extremely Bright or Inadequate Lighting Conditions
How often does this job require working in extremely bright or inadequate lighting conditions?
50%
Pace Determined by Speed of Equipment
How important is it to this job that the pace is determined by the speed of equipment or machinery? (This does not refer to keeping busy at all times on this job.)
49%
Exposed to Cramped Work Space, Awkward Positions
How often does this job require working in cramped work spaces that requires getting into awkward positions?
48%
Spend Time Walking or Running
How much does this job require walking or running?
48%
Conflict Situations
How frequently are there conflict situations the employee has to face in this job?
47%
Dealing With Unpleasant, Angry, or Discourteous People
How frequently does the worker have to deal with unpleasant, angry, or discourteous individuals as part of the job requirements?
47%
How frequently does your job require you to use E-mail?
44%
Outdoors, Exposed to All Weather Conditions
How often does this job require working outdoors, exposed to all weather conditions?
41%
Written Letters and Memos
How frequently does your job require written letters and memos?
41%
In an Enclosed Vehicle or Operate Enclosed Equipment
How often does this job require working in a closed vehicle or operate enclosed equipment (like a car)?
39%
Wear Specialized Protective or Safety Equipment such as Breathing Apparatus, Safety Harness, Full Protection Suits, or Radiation Protection
How often does this job require wearing specialized protective or safety equipment such as breathing apparatus, safety harness, full protection suits, or radiation protection?
37%
Outdoors, Under Cover
How often does this job require working outdoors, under cover (like in an open shed)?
34%
Exposed to High Places
How often does this job require exposure to high places?
32%
Spend Time Keeping or Regaining Balance
How much does this job require keeping or regaining your balance?
31%
Exposed to Disease or Infections
How often does this job require exposure to disease/infections?
26%
Spend Time Climbing Ladders, Scaffolds, or Poles
How much does this job require climbing ladders, scaffolds, poles, etc.?
25%
Spend Time Sitting
How much does this job require sitting?
23%
In an Open Vehicle or Operating Equipment
How often does this job require working in an open vehicle or operating equipment (like a tractor)?
22%
Exposed to Whole Body Vibration
How often does this job require exposure to whole body vibration (like operating a jackhammer or earth moving equipment)?
16%
Public Speaking
How frequently does your job require public speaking (one speaker with an audience)?
14%
Degree of Automation
How automated is the job?
13%
Work Schedules
How regular are the work schedules for this job?
13%
Dealing with Violent or Physically Aggressive People
How frequently does this job require the worker to deal with physical aggression of violent individuals?
6%
Exposed to Radiation
How often does this job require exposure to radiation?
0%
Education
Post-secondary certificate
High school diploma or equivalent
Associate's degree
Interests
Realistic
Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, t
Conventional
Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or hum
Investigative
Work involves studying and researching non-living objects, living organisms, disease or other forms of impairment, or human behavior. Investigative occupations are often associated with physical, life, medical, or social sciences, and can be found in the f
Social
Work involves helping, teaching, advising, assisting, or providing service to others. Social occupations are often associated with social, health care, personal service, teaching/education, or religious activities.
Enterprising
Work involves managing, negotiating, marketing, or selling, typically in a business setting, or leading or advising people in political and legal situations. Enterprising occupations are often associated with business initiatives, sales, marketing/advertis
Artistic
Work involves creating original visual artwork, performances, written works, food, or music for a variety of media, or applying artistic principles to the design of various objects and materials. Artistic occupations are often associated with visual arts,
Work Styles
Work Values
Ready to pursue a career as Electric Motor, Power Tool, & Related Repairers?
Create a professional resume that highlights the right skills and experience for this role.
Build Your Resume Now